LUXURY MIRROR (pearl powder)

LUXURY MIRROR EFFECT POWDER

PEARL EFFECT

Create a flawless, high-shine mirror finish with our Luxury Mirror Effect Powder – Pearl Effect. For the most beautiful, even result, follow the application steps carefully.

APPLICATION GUIDE

1. PREPARE THE SURFACE
Create a perfectly smooth nail surface before application. Lightly buff the surface using a 180/240 grit file, ensuring there are no uneven areas, scratches or imperfections.

2. APPLY TOP COAT
Apply a thin, even layer of no-wipe top coat and cure for 30 seconds.

3. APPLY THE MIRROR POWDER
Make sure your applicator is completely clean before use. Pick up a small amount of powder and gently tap-tap it onto the nail surface first. Once the powder is evenly distributed, gently rub it into the surface until you achieve a smooth, flawless mirror effect.

IMPORTANT: LAMP CHECK
For the best results, always test your lamp before applying the mirror effect. We recommend using a lamp that is no older than 6 months and is suitable for the products you are using.

If your lamp is older than 6 months, we recommend curing the top coat for 60 seconds before applying the powder.

4. REMOVE EXCESS POWDER
Using a soft, clean brush, gently remove any excess powder from the nail and surrounding area.

5. SEAL THE MIRROR EFFECT
Apply another thin, even layer of top coat, ensuring the entire surface is fully sealed.

For best results, we recommend using BORO Professional Top Coat, although you can also test your preferred top coat to ensure compatibility with the powder.

PROFESSIONAL TIP

We always recommend testing the application on yourself or a practice nail before working on clients, especially when using a new lamp, top coat or technique.

For clients who have hard-working hands or put extra stress on their nails, we recommend applying two layers of top coat for additional protection. Cure the first layer for 15 seconds, then apply the second layer and cure according to your top coat manufacturer’s recommended curing time.

Contains: 0.5g